448 Hz

Comments

• Sometimes, 150% may not always be enough in Track Isolation Splitter.

  in Track Splitter Comment by 448 Hz December 18
• Will you please also extend the percentage of Track Isolation Splitter from 150% to like 200% or more when it comes to super low parts in a song headroom wise and dynamic range wise? Because, turning the drums or vocals down in some songs almost sou…

  in Track Splitter Comment by 448 Hz December 12
• And, will you please also add 20 Hz to the equalizer as the update? It's the lowest frequency of human hearing. It's the starting point of it.

  in Encoding kbps Bitrate Comment by 448 Hz November 23
• Single Minded Productions, LLC, has that ever happened to you? Where you added your favorite track to Track Isolation Splitter and the ending point of the song cuts off unexpectedly/out of nowhere/out of the blue? Did it made you delete it from Comp…

  in Track Splitter Comment by 448 Hz October 29
• I could be right or wrong about it/this.

  in Preamp Comment by 448 Hz September 26
• I realized that it's Track Isolation Splitter itself that's doing the ending point errors that cuts off in tracks/songs and not the tracks that I downloaded from a music downloading app. No idea what's causing it to happen, to be honest.

  in Track Splitter Comment by 448 Hz September 1
• Which is also known as the Brilliance and Sheen range in that section

  in 8 Band Equalizer Frequencies Comment by 448 Hz August 29
• I also forgot to put "shimmery" in the 8KHz & 16KHz frequency range section

  in 8 Band Equalizer Frequencies Comment by 448 Hz August 23
• This also means that you're not allowed to fix the Track Isolation Splitter errors that cuts off in some song's/track's ending points?

  in Track Splitter Comment by 448 Hz August 22
• Or, is it both?

  in Minimum Speed Comment by 448 Hz July 21
• @Iqmal Hakimi That could be a good idea

  in Add Lyrics Comment by 448 Hz July 21
• @"Iqmal Hakimi" Same, I hope so. Some tracks in Track Isolation Splitter tends to cut off only at ending points of a song and it annoys me a little bit.

  in Track Isolation Comment by 448 Hz July 21
• Totally, it should happen.

  in A4 Frequency option Comment by 448 Hz June 21
• That's actually a great idea

  in A4 Frequency option Comment by 448 Hz June 21
• I'll explain it again for my official explanation: Some tracks do tend to cut off in Track Isolation Splitter itself in ending points only even though the split tracks are complete. I have no idea what caused it to happen on some tracks with cut-off…

  in Track Splitter Comment by 448 Hz June 15
• I'm now assuming that the 20 Hz is in Upgrade to Pro?

  in Preamp Comment by 448 Hz June 15
• And by "fixed", I'm talking updated.

  in Track Splitter Comment by 448 Hz June 3
• Is it possible to fix Track Isolation Splitter? Or no?

  in Track Splitter Comment by 448 Hz May 28
• Especially when it comes to the Music Speed Changer settings

  in Track Splitter Comment by 448 Hz May 24
• Or, is there nothing that can be done about it?

  in Track Splitter Comment by 448 Hz May 7
• It does the same thing on my Phillips TV. The Balance number range and Equalizer dB range are both at -10 minimum and +10 maximum.

  in Balance Comment by 448 Hz April 23
• Okay, thank you. It's making sense now.

  in Balance Comment by 448 Hz April 23
• Is there anything else I can do to fix Track Isolation Splitter to remove the cutting end points to some tracks/songs?

  in Track Splitter Comment by 448 Hz April 17
• Are you 100% sure that it's the rate itself and not the loop timing improvement and marker button presses that makes the audio distort? If yes, that makes 100% sense now.

  in Minimum Speed Comment by 448 Hz March 25
• Unfortunately, yes it did. I left/reset the preamp to default 0 dB, and the ending point that cuts off in some of the songs in Track Isolation Splitter did the same exact thing.

  in Track Splitter Comment by 448 Hz March 19
• Is the ceiling the input gain of the Limiter and the Threshold is the output gain of the Limiter? Or, no? Am I off about this?

  in Compressor Comment by 448 Hz March 14
• I tried turning up the input gain 1 dB and more as I lower the threshold a couple dB down and more, and it's actually the right, correct, better and proper way to compress in general. Because the maximum input gain is up to 24 dB, it makes the thres…

  in Compressor Comment by 448 Hz March 11
• Now, the equalizer bands will be updated to 9.

  in Preamp Comment by 448 Hz March 11
• Yes, thank you so much. I'm going to be so excited for it the update when it happens.

  in Preamp Comment by 448 Hz March 10
• Including the 20 Hz equalizer band?

  in Preamp Comment by 448 Hz March 10
More Comments